Mechanical/Technical

This is the overall height of the aperture in millimeters, measured brick to brick externally. We recommend to deduct 10mm to allow for brick tolerance.

We recommend you take the measurements at 3 points on the frame and use the smallest of the measurements. In your measurements, please include any profile knocks ons you require.

For more information, please see our survey guide.

Mechanical/Technical

This is the overall width of the aperture in millimeters, measured brick to brick externally. We recommend to deduct 10mm to allow for brick tolerance.

We recommend you take the measurements at 3 points on the frame and use the smallest of the measurements. In your measurements, please include any profile knocks ons you require.

For more information, please see our survey guide.

Mechanical/Technical

This is the side of your door you wish to have the hinges. This is viewed from outside.

For more information, please see our technical hardware specification.

Mechanical/Technical

This is the option of if you would like your stable doors to open outwards of your property or into your property.

For more information, please see our survey guide.

Cosmetic

This is the colour of the profile on the exterior of your property.

For more information, please see the technical colour section.

This is the colour of the profile on the interior of your property.

For more information, please see the technical colour section.

Mechanical/Technical

The cill is the material that the frame sits on external, if required.

The height of the cill is 30mm, the different depth options will distinguish the overhang from the frame, which will be 70mm shorter than the size stated as this is the width of the frame.

For more information, please see the technical profile specification.

Cosmetic

This is the section at the bottom of the frame which you step over

Mechanical/Technical

A full frame threshold will have an upstand of 70mm. A low uPVC threshold will have an upstand of 60mm. A disabled threshold is a Stormguard aluminium threshold which is part M approved.

If a colour (gold or chrome) is not stated in the notes of the product, we will choose the colour we feel is more in keeping with the selected door.

For more information, please see the stable door technical specification.

Cosmetic

A multiple frame make up will show a wider framework on your combination.

Mechanical/Technical

Certain options will show that a multiple framework is required. This is to allow for clearance of openers, disabled thresholds etc. If you have all options available to you, you should select this option dependant on your access to the property. Joining strips are used to cover the joins if requested and are 2.5mm thick coming as a H section that clips into the joints. We recommend for door combinations a 10mm joining strip is used, to opt for the 10mm joining strip you choose multiple frames (no joining strip) and then place the joining - 10mm joining strip aluminium coupler on the sides required,This will then show on the edge of the frame.

Cosmetic

This adds a mullion which splits the top, bottom, or both panels in the door sash.

Mechanical/Technical

These are the joiners that are placed in between frames to join your frames. These sizes are included in your frames.

A 10mm aluminium coupler is recommended on door combinations, or for larger frames needing extra support.

For more information, please see the technical profile specification.

Mechanical/Technical

These are extensions of profile, clipped onto the external frame. Trade often refer to these as knock-ons or add-ons.

These will be required should there be a difference between internal and external measurements due to plaster lines etc.

For more information, please see the technical profile specification.

Cosmetic

Stable doors normal have a key locking top and bottom thumb turn lock for ease of use. We do also offer top and bottom key locking, and top and bottom thumb turn locking.

For more information, please see the technical hardware specification.

Cosmetic

This is the colour of the hardware that will be on your products. The hinges will be white unless a coloured profile on the side of the hinges is chosen they will then be matched to the door hardware colour.

For more information, please see the technical hardware specification.

Mechanical/Technical

The ERA Euro Barrel is a standard 6 pin barrel. The ABS Anti Bump Barrel is a 6pin barrel with an anti-snap feature.

For more information, please see the technical hardware specification.

Cosmetic

This is the colour of the escutcheon that will be on your products.

Mechanical/Technical

For more information, please see the technical hardware specification.

Mechanical/Technical

Glass glazing is the type of the glass you require, double glazed is a duel seal pane whereas triple glazed is a triple sealed pane. Unglazed, no glass will be supplied.

For more information, please see the technical glass specification.

Cosmetic

This option is to select the pattern and privacy that you require for your glass.

Mechanical/Technical

The number by the side of the glass option shows the privacy rating with 5 being the highest privacy.

For more information, please see the technical glass specification.

Mechanical/Technical

Your glass type represents how strong your glass is. Annealed is the common name for float glass and tempered glass is the common name for toughened glass.

Toughened safety glass is required in certain areas. Please see the building regulation information page if unsure whether to use toughened glass or float glass.

Laminated glass is two pieces of annealed glass which is stuck together with a film. Laminated glass is classed as a safety glass usually used for extra security such as shop fronts and part Q building regulation requirements.

For more information, please see the technical safety glass information.

Mechanical/Technical

The rating of your glass represents how energy efficient your glass is.

A Rated is the best glass for energy rating, while none rated is the lowest but also the cheapest.

The acoustic value represents how much sound the glass can dampen; the higher the acoustic value the more sound it can dampen. High acoustic glass is ideal for areas where there is going to be a lot of external noise.

The makeup of the units will change in line with your choice here.

For more information, please see the technical clear glass information.

Cosmetic

The colour of the spacer bar will be shown between the glass units.

Mechanical/Technical

Insulated glass sealed units (IGUs), also known as double glazed units, are constructed with two panes of glass that are kept apart by a spacer bar (or pane spacer) that sits around the inside edge of the glass.

Mechanical/Technical

All decoration is designed and manufactured to best suit the size of your window.

If you would like a specific size please place your order and send an email to customer-services@windowstradeplus.co.uk with your requirements.

For more information, please see the technical glass specification.

This is the extruded uPVC profile that your windows will be manufactured with. We offer Profile22 Optima sculptured and chamfered.

This will be the extruded uPVC internal beading that your windows will be manufactured with. Our standard beading is sculptured but we do also offer chamfered internal beading if the frame profile is selected as chamfered.

Mechanical/Technical

Our standard machine finish offers clean, consistent results using automated cutting and cleaning processes - ideal for most installations. For a higher-end option, our premium hand finish includes hand-polished welds and finer detailing, delivering a superior appearance and tighter tolerances for those seeking enhanced craftsmanship and a more refined final product. For more information, please see the profile specification.